Hydrodynamic characteristics of a FCC regenerator

The hydrodynamic and gas mixing characteristics have been determined in a FCC regenerator (0.48 m I.D.x3.4 m high) with FCC particles. Solids holdup in the dense bed decreases with increasing gas velocity, but it increases in the freeboard region. The bubble/void fraction increases with an increase along the bed height at a given gas velocity and increases with increasing gas velocity at a constant bed height. Backmixed tracer gas at the wall region is higher than that at the center region of the bed. The gas backmixing coefficient decreases with increasing gas velocity.     

Universal yield stress function for biocompatible chitosan based-electrorheological fluid: Effect of particle concentration

Electrorheological (ER) response of biocompatible particles suspended in an insulating silicone oil, was investigated under several different applied external electric field strengths. Chitosan, a biodegradable polysaccharide, was used as anhydrous ER materials. The effect of particle volume concentration on their ER response was examined by focusing on the measurement for rheological and electrical properties. The yield stress of chitosan suspended in silicone oil system as a function of applied electric field strength showed different value of slopes for different particle concentrations, however, all data points collapse onto a universal scaling function.     

Preparation of Monodisperse ZrO2 by the Microwave Heating of Zirconyl Chloride Solutions

Based on the principle that the solubility of a salt decreases as the dielectric constant of the solvent decreases, zirconia powders were prepared by heating a zirconyl chloride solution with a 2-PrOH-water mixture as the solvent. The morphology, size, and size distribution of the resulting particles were highly sensitive to the heating method used on the starting solution. Particles formed under conventional heating methods were polydisperse, agglomerated spherical, or irregularly shaped because of inhomogeneous precipitation through the temperature gradient, the shear force induced by stirring, compositional nonuniformity, and the low heating rate. The present study demonstrated that microwaves provide an excellent means of heating uniformly and rapidly without stirring. The particles resulting from microwave treatment were monodisperse and spherical, with a mean diameter of 0.28 μm.     

The temporal evolution of thermal instability in fluid layers isothermally heated from below

The temporal development of thermal disturbances in the fluid layer heated isothermally from below is investigated, based on propagation theory. This theory is examined by using scaling. To examine the behavior of thermal instability the mean-field approximation is employed and resulting equations are solved by Galerkin method. The stability criteria to mark the onset of convective instability are newly suggested as the intersection point of the growth rate of averaged temperature with that of its fluctuation. The resulting critical time is close to that derived from propagation theory. By considering the nonlinear effects, the characteristic times to represent the detection time of manifest convection and also to exhibit the minimum Nusselt number are discussed.     

A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

Effect of Antimony Addition on Electrical and Optical Properties of Tin Oxide Film

Antimony-doped tin oxide films were prepared on Corning glass substrate by chemical vapor deposition from a gas mixture of SnCl₄–SbCl₅–H₂O. The electrical conductivity and optical transmission of tin oxide films were studied with antimony doping. The film conductivity increased largely without losing optical transparency with a small addition of antimony. The increase of the conductivity was attributed mainly to more electrons donated by pentavalent Sb ions in the SnO₂ lattice. Large additions of antimony, however, diminished the conductivity, optical transparency, and crystallinity of the film. The diminution was found to be caused by fine Sb₂O₅ phases codeposited with SnO₂.     

Diffusional interference in liquid phase counter-adsorptions

A surface diffusion mocel with diffusional interference has been presented for the analysis of multicomponent adsorption of phenols by activated carbon. Surface diffusion coefficients for multicomponent adsorptions were estimated from the relationship between. the surface diffusion coefficient of each species and the surface coverage. The diffusional interference coefficients, W_ij, was determined from experimental counter-adsorption data. The numerical values of W_ij were in the range of 0.4–0.9, which show that the introduction of diffusional interference is necessary to analyze multicomponent counter-adsorptions properly. The proposed model successfully simulates the behaviour of phenols-activated carbon system in a batch adsorber.     

Highly Efficient Overall Water Splitting Through Optimization of Preparation and Operation Conditions of Layered Perovskite Photocatalysts

The layered perovskite materials were found to give the high photocatalytic activity in water splitting reaction under UV irradiation, where the electronic structure of perovskite slab constructing the layered structure (the total cation valency) was the most crucial factor to the high photocatalytic activity. Both the excessive cation valency and the layered structure were required for active photocatalysts, while the slab thickness of layered perovskites had an insignificant effect on water-splitting activity. In order to identify key variables that affected photocatalytic activity and to optimize the performance of (110) layered perovskite, La₂Ti₂O₇ was modified by various methods. The optimum amount of loaded nickel had a great effect and the amount depended on the surface area of the perovskite phase. When an alkaline-earth element such as Ba, Sr, and Ca was doped on La₂Ti₂O₇, the photocatalytic activity was enhanced markedly. Introduction of an alkaline hydroxide into the reaction system as an external additive enhanced the activity further showing extremely high quantum yields close to 50%.     

Measurement and modeling solubility of bioactive coumarin and its derivatives in supercritical carbon dioxide

To design a supercritical fluid extraction process for the separation of bioactive substances from natural products, a quantitative knowledge of phase equilibria between target biosolutes and solvent is necessary. How-ever, mostly no such information is available in literature to date. Thus in the present study, illustratively the solubility of bioactive coumarin and its various derivatives (i.e., hydroxy-, methyl-, and methoxy-derivatives) in supercritical CO₂ were measured at 308.15–328.15 K and 10–30 MPa. Also, the pure physical properties such as normal boiling point, critical constants, acentric factor, molar volume and standard vapor pressure for coumarin and its derivatives were estimated. By these estimated information, the measured solubilities were quantitatively correlated by an approximate lattice equation of state proposed recently by the present authors.     

A quadratic spline approximation using detail multi-layer for soft shadow generation in augmented reality

Implementation of shadows is crucial to enhancement of images in AR environments. Without shadows, virtual objects would look floating over the scene resulting in unrealistic rendering of AR environments. Casting hard shadows would provide only spatial information while soft shadows help improve realism of AR environments. Several algorithms have been proposed to render realistic shadows which often incurred high computational costs. Little attention has been directed towards the balanced trade-off between shadow quality and computational costs. In this study, two approaches are proposed: Quadratic Spline Interpolation (QSI) to soften the outline of the shadow and Detail Multi-Layer (DML) technique to optimize the volume of computations for the generation of soft shadows based on real light sources. QSI estimates boarder hard shadow samples while DML involves three main phases: real light sources estimation, soft shadow production and reduction of the complexity of 3-Dimensional objects’ shadows. To be more precise, a reflective hemisphere is used to capture real light and to create an environment map. The Median Cut algorithm is implemented to locate the direction of real light sources on the environment map. Subsequently, the original hard shadows are retrieved and a sample of multilayer hard shadows is produced where each layer has its unique size and colour. These layers overlap to produce soft shadows based on the real light sources’ directions. Finally, the Level of Details (LOD) algorithm is implemented to increase the efficiency of soft shadows by decreasing the complexity of vertex transformations. The proposed technique is tested using three samples of multilayer hard shadows with varying numbers of light sources generated from the Median Cut algorithm. The experimental results show that the proposed technique successfully produces realistic soft shadows at low computational costs.